Theoretical and Natural Science

- The Open Access Proceedings Series for Conferences


Theoretical and Natural Science

Vol. 5, 25 May 2023


Open Access | Article

Innovations in Architectural Design, Materials, and Constructability

Hanwen Zheng * 1
1 The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China.

* Author to whom correspondence should be addressed.

Theoretical and Natural Science, Vol. 5, 305-309
Published 25 May 2023. © 2023 The Author(s). Published by EWA Publishing
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Citation Hanwen Zheng. Innovations in Architectural Design, Materials, and Constructability. TNS (2023) Vol. 5: 305-309. DOI: 10.54254/2753-8818/5/20230556.

Abstract

Because of the rapid development of social economy and urbanization, people's quality of life has been significantly improved, while people's requirements for housing construction. The requirements of space and environment are also increasing. To effectively meet people's needs, it is necessary to dig deeper into the functions of buildings, increase innovation, promote the integration of architecture and structure, and increase the development growth and to contribute a high level of construction building design. This paper discusses the application of structural design innovation in architectural design, discusses architectural structure design principles, and discusses design innovation countermeasures from the level of integration of architecture and structure in order to promote the further development of the construction industry.

Keywords

Architecture Design, Materials, Constructability, Innovation.

References

1. Liu Zhiji2018(15) Analysis of the problems and solutions in the design of building structures. Science and technology innovation and application.

2. Wang Miao & Bi Zhengchao.(2022). Analysis of architectural structure design innovation based on the improvement of integration degree of architecture and structure. Urban Architecture Space (09),214-216.

3. Aksamija, A. (2016). Integrating Innovation in Architecture: Design, Methods and Technology for Progressive Practice and Research. Wiley-Blackwell. https://doi.org/10.1002/9781119164807

4. Lee M, Chai C, Xiong Y, Gui H (2022). Technology acceptance model for Building Information Modelling Based Virtual Reality (BIM-VR) in cost estimation, ITcon Vol. 27, pg. 914-925, https://doi.org/10.36680/j.itcon.2022.044

5. Mukhopadhyaya, R.N. Swamy, C.J. Lynsdale1999. Building Code Requirements for Structural Con- crete and. Commentary . American Concrete Institute, Detroit, ACI 318-99.

6. Yin Shuwen 2019(17).How to improve the safety of building structure in building engineering design Henan Science and Technology.

7. Liu Chao. 2017(15)Suggestions for improving building safety in the design of building structures Housing and real estate.

8. Song Yang, 2021(3):The application and conservation of classical columns in modern Chinese architecture[J]. Shanghai Craft Art, 108-109.

9. Optimizing structural response of beam strengthened with GFRP plates J Compos Constar, 2 (2) (1998), pp. 87-95

10. Ding Jemin, Zhang Yueqiang, Zhang Zheng. 2019(19)Innovation and practice in the design of building structures Building Structures.

11. Pan, W.; Gibb, A.G.F.; Dainty, A.R.J2007. Perspectives of UK housebuilders on the use of offsite modern methods of construction. Constr. Manag. Econ., 25, 183–194.

12. Seaden, G.; Manseau, A. 2001 Public policy and construction innovation. Build. Res. Inf., 29, 182–196.

13. International Council for Research and Innovation in Building and Construction, Journal of information technology in construction. (2007). Rotterdam, The Netherlands: CIB. https://julac-hkpu.primo.exlibrisgroup.com/permalink/852JULAC_HKPU/10ml02k/alma991021904948603411

Data Availability

The datasets used and/or analyzed during the current study will be available from the authors upon reasonable request.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. Authors who publish this series agree to the following terms:

1. Authors retain copyright and grant the series right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this series.

2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the series's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this series.

3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See Open Access Instruction).

Volume Title
Proceedings of the 2nd International Conference on Computing Innovation and Applied Physics (CONF-CIAP 2023)
ISBN (Print)
978-1-915371-53-9
ISBN (Online)
978-1-915371-54-6
Published Date
25 May 2023
Series
Theoretical and Natural Science
ISSN (Print)
2753-8818
ISSN (Online)
2753-8826
DOI
10.54254/2753-8818/5/20230556
Copyright
25 May 2023
Open Access
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited

Copyright © 2023 EWA Publishing. Unless Otherwise Stated